China QJL hard tooth surface reducer manufacturer

How is the inspection and maintenance of QJL hard tooth surface reducer carried out? We need to know that necessary inspection and maintenance of equipment is beneficial for the next normal use, as well as for avoiding and reducing malfunctions. As a China QJL hard tooth surface reducer manufacturer, the following provides a detailed description:

The selection of lubricating grease should be based on the bearing load of the walking QJL hard tooth surface reducer. For heavy loads, lubricating grease with low penetration should be selected. When working under high pressure, in addition to low penetration, it is also necessary to have high oil film strength and extreme pressure function. When selecting lubricating grease based on environmental conditions, calcium based grease is not easily soluble in water and is suitable for dry and low moisture environments. When selecting lubricating grease based on working temperature, the main indicators should be drip point, oxidation stability, and low-temperature performance. Drip point can generally be used to evaluate high-temperature performance, and the actual working temperature of bearings should be 10-20 ℃ lower than drip point. The use temperature of synthetic lubricating grease should be 20-30 ℃ below the drip point.
Different lubricating oils are prohibited from being mixed with each other. The positions of the oil level plug, drain plug, and vent are determined by the installation location.
In daily use, it is crucial to pay attention to maintenance, inspection, and upkeep of QJL hard tooth surface reducers, so everyone should take it seriously.