ZL series reducer

What kind of equipment also needs to be well maintained, and ZL series reducer also needs maintenance so that it can work better and improve efficiency. Here are some maintenance tips that ZL series reducer users can take a good look at.
Before putting into operation, install the recommended type and value of lubricating grease into the gearbox. The reducer is lubricated with lubricating oil. For vertically installed reducers, considering that lubricating oil may not guarantee reliable lubrication of the bearings above, alternative lubrication measures are adopted.

Before operating the ZL series reducer, inject an appropriate amount of lubricating oil into the gearbox. Gearboxes are usually equipped with oil injection holes and drain plugs. Therefore, the installation position must be specified when ordering the gearbox.

The working oil temperature should not exceed 80 ℃.
The combination reducer with lifelong lubrication is filled with synthetic oil at the manufacturing plant. In addition, ZL series reducers are usually supplied without lubricating oil and come with oil injection and drain plugs. The quantity of gearbox lubricating oil listed in this sample is only an estimated value. Set the position of the oil level plug according to the installation location specified at the time of ordering to ensure correct oil injection. The amount of oil injected into the ZL series reducer should be determined according to different installation methods. If the transmission power exceeds the thermal capacity of the gearbox, an external cooling device must be provided.