ZS cylindrical gear reducer manufacturer

I believe everyone has some understanding of ZS cylindrical gear reducer.To have a better understanding of it,it is necessary to understand its lubricating oil.Below,ZS cylindrical gear reducer manufacturer will briefly introduce the inspection method of lubricating oil:
1.Oil level inspection of ZS cylindrical gear reducer

Its oil level is determined by the distance between the oil level and the oil level bolt.The positions of the oil level bolt,oil drain bolt,and vent are determined based on the installation position of the gearbox.For specific installation positions,please refer to the gearbox installation position drawing provided by the production enterprise.

2.Oil quality inspection of ZS cylindrical gear reducer
Its lubricating oil may deteriorate due to various reasons after a period of use,so it is necessary to regularly check the oil quality of the lubricating oil.The oil quality inspection first involves cutting off the power and waiting for the gearbox to cool down,then opening the oil drain bolt to obtain an oil sample.If the oil sample shows deterioration,the lubricating oil should be replaced immediately.
3.Lubricating oil replacement for ZS cylindrical gear reducer
The replacement of its lubricating oil should be carried out at the operating temperature of the machinery.At this time,the oil temperature is high and the viscosity of the oil is low,making it easier to replace.When replacing the lubricating oil,we should first cut off the power supply to prevent electric shock,wait for the gearbox to cool down properly until there is no risk of combustion,and then start replacing the lubricating oil.
I believe that after understanding the inspection method of lubricating oil for ZS cylindrical gear reducer,it will be more helpful for you in future use.That's all for the above knowledge.If you have any further questions,please continue to follow!