DCY hard tooth surface reducer price

The DCY hard tooth surface reducer price price is very expensive.The reducer is a power transmission mechanism that uses a gear speed converter to reduce the rotation of the motor to the desired rotation and obtain a large torque.Below is an introduction to how to maintain the ZQ gearbox during the break in period:

1.Reasonably select lubricating oil,especially DCY hard tooth surface reducer prices with input power greater than 11KW must be filled with medium load gear oil.Pay attention to regularly checking the lubricating oil,hydraulic oil,coolant,oil level and quality,and check the sealing of the entire machine.During the inspection,it was found that there was an excessive lack of oil,and the cause should be analyzed.At the same time,the lubrication of each lubrication point should be strengthened.It is recommended to add lubricating grease to the lubrication points every week during the running in period(except for special requirements).When connecting a vertical gearbox with an oil pump to the power supply,pay attention to the direction of rotation of the oil pump,clockwise rotation is correct.

2.Keep the gearbox clean,adjust and tighten loose parts in a timely manner to prevent further wear or loss of components due to looseness.
3.At the end of the running in period of DCY hard tooth surface reducer price,mandatory maintenance should be carried out on the machine,and inspection and adjustment work should be done well.At the same time,attention should be paid to the replacement of oil.
4.For non-standard reducers,operators should receive training and guidance from the manufacturer,have a full understanding of the structure and performance of the reducer,and obtain certain operation and maintenance experience before operating the non-standard reducer.
5.Pay attention to the working load during the running in period of DCY hard tooth surface reducer price.The working load during the running in period should generally not exceed 85%of the rated working load,and appropriate workload should be arranged to prevent overheating caused by prolonged continuous operation of the reducer.
6.Pay attention to regular observation.If any abnormalities occur,stop the vehicle in a timely manner for troubleshooting.Before the cause is found and the fault is resolved,stop the operation.
By paying attention to maintenance during the use of DCY hard tooth surface reducer prices,their service life will be long.Paying attention to and implementing maintenance during the running in period of DCY hard tooth surface reducer prices as required can reduce the occurrence of early failures,extend their service life,and improve the production efficiency of reducer equipment.